Dugouts USA Southern Steel Dugout Frames

NOTE: The Southern structures are for areas without a Snow Load requirement. Northern structures can only have bay spacing up to 10FT, whereas Southern bay spacing can go to 14'6" if required.

Support columns shall be fabricated of A500 square structural steel tubing with an electrically welded 5/8″ thick A36 steel base plate.
Beams shall be fabricated of A500 square structural steel tubing.
Steel frame members shall be blasted to near white metal, cleaned with an 8-Stage pre-treatment system, and zinc rich primer coated prior to the finished powder coat process. Powder coat finish shall be TGIC electrostatically applied polyester powder.
Roofing shall be pre-cut 26 gauge Multi-Rib metal panels.
Fasteners shall be 1″ diameter grade 5 bolts with flat washers and locknuts. Bolts meet ASME B 18.2.1 with a minimum tensile strength of 120,000 psi. All fasteners shall be concealed inside the tubing.
Anchors shall be 1/2″ diameter x 8 1/2″ zinc plated concrete wedge anchors.

Panel Profile: 3/4″ height rib 36″ coverage width

*Panel Style: Sidelap seam or exposed fastener
Gauge: 26 Gauge
Substrate: Grade 80 Galvanized steel sheet (G60), conforming to ASTM A446 for painted panels
Texture: Smooth
Finish: Ceram-A-Star 1050 high performance silicone-modified polyester
Color: Selected from manufacturers standard line